FMM0502BACP03 is a high-pressure line filter element suitable for coal mill hydraulic oil stations. It is a matching component benchmarked against the MP Filtri FMM050 series filter. It is used for oil purification in the pressure line of the coal mill hydraulic system to trap solid contaminants such as metal wear particles, dust and gum in the hydraulic oil. It protects precision components including hydraulic valves, hydraulic cylinders and oil pumps, stabilizes the working conditions of the hydraulic drive and tensioning device of the coal mill, and reduces the risk of coal mill shutdown due to failure. This is a domestic replacement for imported filter elements, suitable for the harsh heavy-load and dusty working site of coal mills in cement plants.
FMM0502BACP03 is a high-pressure line filter element suitable for coal mill hydraulic oil stations. It is a matching component benchmarked against the MP Filtri FMM050 series filter. It is used for oil purification in the pressure line of the coal mill hydraulic system to trap solid contaminants such as metal wear particles, dust and gum in the hydraulic oil. It protects precision components including hydraulic valves, hydraulic cylinders and oil pumps, stabilizes the working conditions of the hydraulic drive and tensioning device of the coal mill, and reduces the risk of coal mill shutdown due to failure. This is a domestic replacement for imported filter elements, suitable for the harsh heavy-load and dusty working site of coal mills in cement plants.


Multi-layer gradient glass fiber composite filter media with high dirt-holding capacity, β ratio ≥1000, stable filtration accuracy and low risk of failure during long-term operation.
Built-in thickened stainless steel support core, excellent pressure differential resistance, capable of withstanding system pressure shock, resistant to collapse and damage under alternating working conditions during coal mill start-up and shutdown.
NBR nitrile rubber seals with reliable sealing performance, good resistance to swelling in hydraulic oil, and no leakage under fluctuating oil temperature.
The matched filter is equipped with a 6bar bypass valve. It opens automatically when the pressure differential exceeds the set value to ensure continuous oil supply for the coal mill hydraulic system and avoid shutdown caused by oil cut-off.
Compatible with differential pressure transmitters / visual clogging indicators for early warning of filter blockage and convenient maintenance.
Domestic alternative with short lead time and better cost performance than imported originals. Fully compatible dimensions with the original filter housing for direct interchangeable installation.
Filtration Rating: 3μm
Filter Media: Inorganic superfine glass fiber composite media + inner & outer stainless steel support screens
Seal Material: NBR Nitrile Rubber
Compatible Fluids: Anti-wear hydraulic oil, phosphate ester hydraulic fluid, water-glycol, emulsion
Nominal Pressure: Max. Working Pressure 42MPa
Compliance Standard: ISO 16889
Primarily used for pressure line filtration of coal mill hydraulic oil stations in cement plants. Also applicable to heavy-duty hydraulic systems in power plants and mines, as well as high-pressure hydraulic lines of metallurgical equipment. Suitable for industrial hydraulic conditions characterized by heavy dust, temperature fluctuation and pressure shock, to protect precision hydraulic parts such as coal mill tension cylinders, hydraulic pumps and servo valves.
Contact: LEO
Phone: +86 18603736970
Tel: +86 15617189062
Email: xy@xyfilters.com
Add: A11, 1st Floor, Chuangye Building, No.1 Park, High tech Zone, Xinxiang City, Henan Province