Production Process Analysis of a Mahler Filter Element PI3108SMX10

The price, filtration accuracy, and service life of the PI3108SMX10 Mahler high-efficiency hydraulic oil filter element can be contacted by Xinyuan Environmental Protection Technology, a professional filter manufacturer in Xinxiang. The price is affordable and the delivery time is short. The PI3108SMX10 Mahler filter element is installed in the hydraulic system of a chemical plant to remove metal powder and other mechanical impurities worn by various components in the hydraulic system, keeping the oil circuit clean and extending the service life of the hydraulic system. Mahler filter element has good breathability and low resistance; Large filtration area and large pollutant capacity; High temperature resistance, good corrosion resistance, and other characteristics. Our company uses high-quality filter materials and advanced processing equipment to produce them. PI3108SMX10 can completely replace the original product for use. The filter element adopts the design concept of medium flowing from the outside to the inside, and the core uses a spiral skeleton to support the pressure resistance of the entire filter element. The pressure capacity can reach 10-32 kilograms; The filter material that adheres closely to the skeleton uses imported high-quality filter paper, with an accuracy of 1-25 μ M is for customers to choose from and can meet their needs under various operating conditions, with a purification ability to achieve a higher level of cleanliness. The appearance design of the series filter element is beautiful and generous, with superior and reliable performance!

The PI3108SMX10 Mahler hydraulic oil filter element uses imported fiberglass filter material, so the filtering accuracy can also reach the same filtering accuracy as foreign filter elements. In addition, the end cover of the filter element can be made of stainless steel and stamped end covers, supporting the labeling and OEM production of customer friends. We welcome customers to consult and cooperate. Mahler hydraulic filter is suitable for fine filtration of hydraulic system oil, which can filter out metal particles and rubber impurities in seals caused by component wear in the system, keeping the oil flowing back to the tank clean. The filter is directly connected to the oil suction and return pipelines through threaded connections and extends into the oil tank. It has a simple structure and is easy to use and install. The filter element uses a new type of fiberglass filter material, which has the advantages of high oil passing capacity, high filtration accuracy, small pressure loss, and large pollution capacity.

Technical Parameter

Filtering accuracy: 1-100 μ M

Working pressure (MAX): 21MPa

Working medium: general hydraulic, phosphate hydraulic oil, emulsion, water ethylene glycol

Working temperature: -30 ℃~+110 ℃

The maintenance method for hydraulic oil filter element is as follows:

1. Before replacing, drain the original hydraulic oil, check the return oil filter element, suction filter element, and pilot filter element to see if there are iron, copper, or other impurities attached. If there are any, there may be hydraulic component faults. After troubleshooting, clean the system.

2. When changing hydraulic oil, all hydraulic oil filter elements (return filter element, suction filter element, pilot filter element) must be replaced at the same time, otherwise it is equivalent to not changing.

Mahler filter element related models